3

CLICK IMAGES
TO ENLARGE

Style 1 Cabinets. (2 SLIDING DOORS)
Wall mounted or free-standing versions.
For dust free contents.

The thumb print images and a browse through some customer photos, will show that the size and shelf variations available are almost infinite.

Size limitations relate to :
a ) The overall maximum packaged dimensions and weight set by the carriers. See Delivery info. If you can collect, larger versions can be made.
b) Shelf depth. This is the depth between the door glazing and the rear panel of the cabinet. The maximum is 4" (100mm) but can ofcourse be less.
Please note that these sliding door cabinets are best in a landscape layout where the base length is greater than the height.

Shelves. The cabinet base should be counted as the first shelf. Up to 5 shelves are included in the price. You may have less or more to choice.
The thickness of each shelf is approximately 12mm (1/2"). Shelves are not adjustable.

Glazing is 4mm crystal clear acrylic for maximum safety and less weight than glass.

Locking doors I can provide a centralized tamperproof mechanism at an additional cost.

Price per cabinet is given below in 3 size groups by L + H (Length plus Height).

PLEASE NOTE: **** The maximum length plus height (L+H) for the largest cabinet available, delivery by carrier, is 65" e.g. 40" long x 25" high, 36" long x 24" high or any other combination where the length + height is more than 50" but no greater than 65" would be priced as given for 65" in the table above
The length along the base of a cabinet is measured across the outer edges of the side frame. It does not include the decorative side mouldings fitted as standard and which together add approx. 1". Where 2 or more cabinets are to be mounted side by side and you do not want a gap between each or, where a cabinet has to fit in an alcove or other tight space, please ensure you request no side mouldings to be fitted.
If it is the internal width that is critical please so advise.
The height of a cabinet is the external height from bottom to the top of the frame.
Cabinet depth is taken as being the space behind the doors to the rear of the cabinet.
Kindly allow up to 1/4" (5mm) overall for variation at manufacture.